Probably every self -respecting man takes care of his car. It is right — rains can provoke corrosion on the case, long frosts discharge the battery and so on. So that all these addictions should be avoided garage should be acquired. The easiest way is to make a garage out of corrugated board, and this is how it is done: first you need to make the foundation. Poured from the columnar method, that is, a trench is pulled out by half a meter, then strengthened and poured with cement. Next is the floor filling. Usually ordinary concrete is taken and the base of the garage is poured, but you can also make a wooden floor, or one can do it. It will also be good if the concrete is flooded at an angle, so that it is easier to leave the garage.
Further walls. The walls can be either with the frame and without — it all depends on the type of corrugated board. If in your case you need a frame, then ordinary metal rods are taken for this, they are welded, and corrugated board is already clinging to them. This design is a stable and reliable field. And last the roof is laid. Typically, the roofs are made plain, it is desirable that one sheet covers the entire length of the space, then take the second sheet and put it on the previous minimum of 20cm. Flash. Spaces should be stacked. Such a garage, of course, is temporary, but it can be done in a few hours. Try to make accurate dimensions so that nothing is overdated, and then you will have a real garage for the car.
