There is nothing eternal. This expression applies to the protective layer of parquet. Over time, the varnish coating is erased, scratches and becomes unusable. As a result of this, it is necessary to update the appearance of the parquet coating, grinding it and re -opening it with varnish.
Grinding the parquet in itself performs special equipment. These machines remove the upper thin layer using grinding or sandpaper.
Rotating, grinding paper smoothly cleans the parquet board, while removing all the tubercles. For a whole wood parquet, a grinding machine with a drum type of wood processing is best suited. It can deform a three-layer parquet due to strong vibration, but in such cases a flat-grinding machine is used.
To remove varnish in narrow places and corners, a grinding machine is used. When grinding, the parquet uses several types of sandpaper, starting to remove the varnish of the coarse, and ending with the smallest.
The cracks must be sealed with Tyrsa, formed during grinding, mixed with varnish. I use this method of sealing the cracks, you can achieve good results, because the color of the resulting putty will completely coincide with the color of the floor.
The latest stage of updating the parquet is the application of a protective layer of varnish on it. Experts recommend opening parquet with varnish three times. Gradually reducing the pressure on the roller. In this case, the parquet becomes more aesthetic and serves longer.
