Quite often, situations arise in which the old layers of silicone sealant should be replaced. The reason for this may be directly erasing the existing old layer or poor -quality sealing. In addition, it is often recommended to replace the silicone seal as a preventive measure.
The process of such work itself, as a rule, must correspond to a certain technology and is carried out in a strict sequence. In particular, it is initially necessary to get rid of the old sealant layer. You can do this with a spatula or a regular knife. If this process represents some difficulty, then it is better to use a special remedy for removing a sealant, which is quite easy to purchase.
A layer of its penalty is applied to the seam seam. In just a few minutes, all layers of the silicone seal will be removed extremely easily and quickly. After such cleaning, the seam must be thoroughly wiped. If at least a little penal remains on it, then the subsequent sealant will lie badly and will not stay tight. It is also recommended to seal the surface gap forming using painting tape, which will allow you to do the work more carefully. The sealant itself should be applied extremely evenly. Когда он полностью высохнет, использованный малярный скотч можно будет убрать.
