After fixing endless W-figurative tracks in the plate of the insulation, we get a series of protrusions (wire brackets) protruding 2-3 cm above the insulation. As the main reinforcement installed on both sides of the panel, welded nets of wire with a diameter of 4 mm with a square cell of 50 mm x 50 mm are used. Such nets are superimposed on the ledges of the tracks, and welded with them with contact welding, in the places of touch.
With this design, each V — the figurative section W — the figurative route is welded with a straight wire from the grid, as a result, a voluminous wire structure is obtained, which is based on the triangles. Everyone knows that the triangle is a rigid, not deformable figure — this gives the reinforcing frame high strength and rigidity. In a complex with a layer of concrete applied during construction, it provides a greater bearing capacity.
Flat welded reinforcing nets, in this design, perform not only the role of compounds between endless ties, but also thanks to cells of 50 x 50 mm, provide good conditions for filling the frame with concrete and strengthening it.
Info Cais Blister — excellent packaging for small construction products, such as nails, screws, fasteners. Transparent plastic packaging, combined with the possibility of using a wide variety of design solutions, allows you to effectively submit the goods to a potential buyer.
