DIY carpet laying

Carpet can be laid on almost any basis. It is also worth adding that the basis should be clean and even, and there should not be holes, cracks or protruding nails on it. First of all, before the acquisition of this material, it is necessary to thoroughly measure the entire room, while taking into account all the niches, openings in the doors and protrusions, and then draw a sketch of styling of this floor material.

Further on the manufactured lines of the cut and joints are planned. All obtained dimensions of the blanks should be increased around the entire perimeter by 10 cm, and also to the same distance — for all joints. Now you can buy not only carpets, but also the kitchen to order Astana offers them in a wide range. It is worth saying that if the carpet has a drawing, then the allowance must be made more so that the pattern looks right. Before you start laying the carpet, it should be allowed to lie in a straightened form for a certain time.

It is best to put this material on all rooms completely. However, if you need to dock 2-3 pieces, then they should be trimmed exactly in the middle of the trimmed pieces. After laying, you should start the final part of the work — this is the fastening of the skirting board and the page that closes the joint between the flooring in the corridor and the carpet laid in the room. Having released the room from the furniture, the carpet unfolds so that it enters the baseboard equally.