Laying tiles on the floor of the bathroom is not complicated, but quite painstaking work that can take a lot of time if the floor surface is not even. Before starting the main process, it is necessary to completely remove the old decorative flooring and check the construction level of surface evenness.
If there are irregularities, pits, hollows, and so on, they should be eliminated using any construction solution, such as a solution of cement and sand. If the surface of the floor in the bathroom is completely unequal, then this solution can be poured out the entire floor “according to the lighthouses”, this will make the working surface perfectly flat.
You can purchase tiles in a specialized store of finishing materials, if you need to buy door cassettes, then contact a large online store that offers entrance and interior doors, as well as components and accessories for them.
Lay the tile on a flat surface using special glue, which is applied along the perimeter of the back of the material. The tile is glued with a slight physical effort and be sure to check the evenness of the styling of the material using the building level.
The next tile is glued to the floor, but between the tiles it is necessary to insert a construction cross, which will hold the material in place. As soon as the tile dries, remove the crosses and cover the seams with a special putty, which is usually offered white. Wash the floor with water with detergent, while gently remove excess glue from the surface of the tile.
