Very often there are problems with damage to the surface of the bathroom. In this case, usually people resort to replacing the bathroom or use damaged. However, the situation can be corrected by carrying out restoration work. It is quite possible to do it on its own. First you need to prepare the base with a high quality. To do this, clean the bath of the old coating. This can be done by using waterproof sandpaper.
Dear readers of our site, if you want to watch new best films. Then we advise you to go to the site —
It is very important not to miss a single centimeter of the surface, otherwise the expected effect will not work out. This stage takes enough time and effort. Therefore, you need to stock up on. If the remnants of the rust remain the stripping process, you need to repeat it again.
After stripping, the surface is degraded and time is given to dry out. In the presence of large chips, the surface is aligned with the epoxy composition. After these work, a smooth base is formed.
After that, you can proceed to the restoration process. To do this, using a tissue tampon or brushes made of natural hair, the first layer of coating is applied. After 36 hours, the second layer is applied. You can use a restored bath only after 7 days.
