There are a large number of wall alignment technologies. One of the methods of leveling walls is a method using foam. Foam is made by manufacturers of building materials, you can purchase this material in any building materials store. The standard dimensions of the foam 0.5m*1m the thickness of this material can be different from 1cm to 5cm. To perform installation, you will need tools such as shock drill, hammer, trowel, stationery knife and container for kneading glue for foam. Foam installation can even be performed in construction. Using a drill of dowels-gribly, it is necessary to attach the sheets of foam to the wall pre-apple special glue along the perimeter of the sheet. This is necessary in order for a foam sheet to fit tightly to the wall. When performing installation work, do not rush, you need to carefully fix the sheets, so that there are absolutely no gaps between them. When all sheets are attached, carry a special glue prepared on them, the applied glue on the foam will serve as the basis for the painting mesh. After the glue dries, the foam acquires strength and is not inferior in its properties to drywall. Naturally there are disadvantages in this type of wall alignment to use in rooms with high humidity it cannot.
