Dismantling work is one of the most crucial stages in construction or overhaul. Before erecting a new building on the site of the old, you have to clean the site for the foundation. The difficulty of dismantling the building depends on where the object is under demolition. Before the work itself you have to draw up and draw up all the required documentation. These are permits from the municipal authorities and the demolition agreement, and other papers. The most difficult dismantling is associated with buildings in the city center. As a result of the demolition of buildings, tons of garbage and fine plaster dust are produced. However, before the demolition itself, experts must remove all engineering equipment. These are water pipelines, sewage, gas pipelines. Before these work, the building is completely de -energized. All water is drained from the pipes. Then remove the shells, flush tanks, toilets and washbasins.
If these plumbing items in the firm state are removed carefully for the possibility of future operation. After that, the pipes themselves begin to dismantle, along with counters and other devices. Heating pipes are cut into sections of eighty kilograms to make it more convenient to transport. All pipes are spinning in places of joints. Before unscrewing the pipe should be tapped. The gaskets are usually burned. The electric part begins to be dismantled from sockets, cartridges, switches and shields. Only after that the wiring itself is removed. The wires in each apartment are dismantled separately. When dismantling, you need to remember the load on the floor. The room cannot be folded in the room.
