Drywall is the easiest and most convenient way of leveling walls. With him, even the most non -even wall will be perfectly straight. The leveling of the walls with drywall is of two types, with or without a frame. But the second way is more profitable, as it eats less space than installing the frame. Before starting work, you need to calculate what a load will be on it.
They are not designed for such a load as, for example: a water heater. For this, the walls will need to be additionally strengthened. Before the heating, how to proceed with the leveling of the wall of drywall, it must be leveled with a solution so that there are no large irregularities and after O o DRUGE. Alignment without a frame. This procedure is suitable for those who cannot afford to reduce the space of the room.
In the wall on which you will glue drywall, drill holes at a distance of 20 — 30 centimeters. It is necessary to score dowels into these holes, and screw the screws. For each sheet of drywall, there should be 40-50 screws. Alignment of the wall with the frame. It is necessary to start with markings for installing the frame, it is applied first to the floor, and then on the ceiling strictly vertically. After the marking is completed, it is necessary to install the guides using self -tapping screws. Then in the guides on the floor and ceiling, it is necessary to install racks. After the installation is completed, it is necessary to fasten the sheets of gypsocortone using self -tapping screws.
