If you want to breathe a second life into your parquet, then it will need to be cycle. The process of cyclime itself is a rather complicated and dusty process, since a small layer of wood will be removed. In addition, a fairly thin layer will be removed during the cycle, since cracks will prevent this, which will lead to an increase in the deadlines for this work.
In order to accelerate the process of cycling, it is necessary to carry out preparatory work, for example, to remove the skirting board, as well as check for the presence of the remaining nails or screws that must also be removed. If you have never performed a cycle, then it is best to use the services of specialists who will do this work correctly. The main features of the Parni cycle is that if it is old enough and has some irregularities, then you are unlikely to achieve a perfectly even surface, since this will impede the hollows and there can be nothing from a certain parquet board at all. In such cases, it is better to use a special drum cycle, which will not only remove the old layer of varnish, but also level the surface and at the same time do not remove anything superfluous. The number of such passages will depend on the thickness of the parquet board, which lies on the floor.
