There are many different office equipment in the offices. And as a result — a great many electrical wires that are moving into a ball. They very often clutter up only rooms and can cause serious inconvenience. The best way out of the situation is only one — to hide the wires. There are different solutions. First — hide in the wall. One of the simple solutions is to put the wire immediately in the wall by means of special fastening. To do this, put the wire inside the bracket and nail it to the wall with a nail. And all. But if the walls are concrete or brick, then this method is not suitable, since it is practically not realistic to score a nail in them. The best option is to lay an electric wire under plaster.
Thus, they will be reliably hidden. This requires a drill or a perforator and make a small niche in the right place along the length of the wires. All cables are folded in this niche, fixed with nails driven between bricks in the intervals.
After all the options are done, you need to make sure of the reliable concealment of the wires. As soon as this is checked, the last stroke will remain — to put the niche to the niche. Now you can be calm — the wires are reliably covered. At the end of the repair, when it makes sense to hide all the wires, using a special cable for this — a channel that is attached by self -tapping screws in the right place of the wall. Then all wires are packed there and closed with a plastic lid.
