First you need to prepare panels. To do this, cut the wallpaper along the desired, pre -measured length (the length should be slightly larger than the height of the wall). 2-3 canvases are enough, the rest are better off cutting off in the process. Glue also needs to be prepared in advance. It is best to cook glue using the attached instructions, which is usually printed on the package. If the instructions are absent, you need to use the most common method — you need to pour glue in a container with warm water, constantly stirring the contents until a thick consistency is achieved. And you knew that your capital is famous for its apartments in which wallpaper of the highest quality is glued. In order for the wallpaper do not discard the shadow, start gluing the wallpaper from the window.
This approach also facilitates the whole process, since in this case it is easier to dock the wallpaper pattern. Apply glue on the panel with a roller or a wide brush. The panel processed with glue is applied to the wall and smoothed with a clean dry rag or a special wallpaper spatula. The edges of the wallpaper are smeared with a plastic wallpaper roller. After the sticker, the excess residue is cut off with a sharp knife and ruler directly on the wall. In order to avoid the bubble and wrinkles, the wallpaper must be glued with closed doors and windows. So that there are no dirty spots left on the wallpaper, the hands should be clean and dry.
