For starters, we will make a reservation, the laminate does not crest out in the rooms with high humidity and where it will be subject to its constant effect. The surface under the laminate must be thoroughly aligned, put vapor barrier. If there is a need or desire, then noise insulation also. The first row of a laminate to lie down from the wall in which there is a window (falling light hides the joints between the laminate slabs). The installation of engineering networks Yekaterinburg can also affect engineering networks that can go through the premises when you lay the laminate, have this fact in view of that, in case of it, immediately provide access to engineering networks.
We retreat from the wall about 1 centimeter, put the wedges (when expanding, the laminate will not lead and it will not spoil its appearance), lay the first row of plates and carefully with the help of a small plank and hammer, we proceed, thereby attach the plate to the plate. The next row. Take a whole laminate tile, and cut it in half across, and connect half of the tile of the second row with the whole first tile of the first row. Next, lay and fix it, kiss the tile, kiss again and then half.
The third row begins with a whole laminate plate. And then the rows alternate according to the drawing. This pattern allows you to distribute evenly load loads and it looks pretty. If necessary, the laminate tiles can be cut, cut holes, in the word to adjust to any obstacles encountered.
