To avoid errors, it is better to get a wall or floor with a pencil in front of the masonly tiles of the tile. Thus, you will represent where each tile will be located. Some masters do not make such markings, but most likely you are not a master and it’s better not to take risks.
For example, starting the first strip with whole tiles, you can find that the last strip is very narrow and ugly. In this case, you need to cut the first strip and the last so that the width of the strips is not so small and is the same.
Tiles are placed only on special glue. He freezes well and quickly. Therefore, do not immediately knead a large amount of glue. It is better to dilute a little less than to dilute a lot and it will deteriorate.
Do not apply glue for tiles immediately to a large area, as it will begin to absorb the floor or wall and will quickly grasp.
A special spatula with teeth is used to apply glue. It can be purchased at almost any construction store. (to be continued)
Inari company offers high -quality interior printing. This type of print requires very high quality, good color rendering. For this, special equipment is used using stable water ink.
