From time to time everything becomes unusable. Including parquet. Having laid a new parquet, you definitely need to make a replacement once every three or four years. Projects of houses and cottages take this circumstance to. Indeed, over time, varnish, which covers wood, is erased, changes its original shade to a dirty, well -worn color. That is why it should be periodically replaced, that is, make a parquet cycle. Cycles is the process of removing the old layer of varnish, and applying a new layer to parquet. In itself, such a procedure is very noisy and dirty.
Cycles are used to carry out cycles. Previously, people produced everything on their own. They removed the old varnish from the floor, using a pointed piece of glass or steel plate. However, to do it manually — the process is tedious and brings little effect. And with the help of a cycle machine you will significantly increase efficiency and save yourself from strong overwork. First there is a process of gross grinding. The device removes all visible and significant irregularities from the floor surface and removes the entire old varnish. In hard -to -reach places, it is necessary to process the floor manually. For corners, plane -grinding cycles are used.
The initial stage for cycles of parquet is, of course, aligning the floor surface. Then the old varnish is removed. After carefully, see if all the rivets are firmly installed in their places. If you find problems, eliminate, and you can proceed to the cyclist itself. To eliminate strong irregularities, work out the car with the machine more than once.
