Before laying, the tiles are necessarily carried out, as it can have a little difference in size and shades. If possible, then before laying the tiles are better so to soak in ordinary water for half an hour. If this is done, then the surface of ceramics will not pull the water from the glue, which will increase its elasticity.
After that, the surface intended for cladding tiles is prepared. All previous coatings are removed from the surface, waterproofing is produced in wet rooms, the surface is adjusted to perfect evenness, using the level. This suggests that the basic base of the floor or wall, as well as other types of surfaces, is aligned with screed or plaster.
Only now, after the surface of the surface intended for facing is completely dried, can there be laying ceramic tiles to glue. Lay the tiles immediately on a brick base using a cement-sand mortar, is not recommended, although it is possible. In this case, a high -quality solution plays a large role and, undoubtedly, the ability of a specialist in such work. Typically, this method is saved by building materials on unfulfilled plastering.
