In frame houses, functions such as bearing and enclosing — these are different functions. The supporting function is performed by the frame, and the functioning function is the insulation (together with wind, hydraulic protection and steam browning materials). Thus, it turns out even easier to maintain heat in the frame house than in brick or timber. For example, an increase in the layer of insulation will be enough to notice the heat resistance, but at the same time the supporting structure will not have to be strengthened.
What does the design of the wall of the frame house look described below:
• casing from the inside; • a vapor barrier; • the frame itself in its gaps is a heater; • a membrane for protection from the wind; • external sheathing; • and as an option, you can make the facade cladding;
Also, all the necessary engineering communications are usually hidden inside this design of the wall of the frame house, they make a frame house convenient for living and give a modern level of comfort.
If you disassemble separately each layer of this “pie”, then everyone gets its own purpose, and the entire structure of the wall of the frame house, in general, is perfect for comfortable living in any climate. zone. The only drawback of this design if, for example, the membrane will become unusable to protect against the wind, then in order to get to it you will need to disassemble almost the entire structure, so when buying you need to trace for all elements an approximately equal service life.
So if you save and buy less durable material for this design, this will lead to overpayment in the future. But also to buy one more expensive element than the rest also makes no sense.
