Liquid nails are inherently ordinary glue, so you need to remember that before carrying out the work on gluing surfaces, it is necessary to clean the surface, degrease, dry, dry. The packaging is opened along a certain line at an angle of 45 degrees, remove the protective film, using an acute object. When using liquid nails, it is better to use a special construction gun, in the absence of this, the glue is applied with dotted lines, points, zigzags on one of two glued surfaces. Then you need to put it on the processed item with force and hold in a pressed position for a few seconds. Another option for gluing surfaces, without effort, the material is pressed against each other, then disconnects.
The time is withstanded from 5 to 8 minutes (for light objects) and from 15 to 30 minutes (for heavy products). Further, the material is fixed and compressed tightly, the clutch occurs within 5-10 minutes. For applying liquid nails in the form of sealants, a spatula is used, the center of the crack and several millimeters around the treated surface are sealed. To clean the tools and surfaces, the manufacturer is recommended to use mineral solvents or a white spiteity in theory, toluene is inherently considered ineffective. In practice, turpentine is applied, the best way to clean is the scraping.
