In order for the apartment to be warm in the apartment, you need not only to glaze in the loggia, but also be sure to warm it. Due to this, the temperature in the apartment rises by at least 2 degrees.
To insulate loggias, it is recommended to use modern materials, because they are not only effective, but also allow you to save a few centimeters in view of their compactness. In this regard, they quite often began to use foam, because its surface is covered with aluminum foil, and the second layer will naturally be a foam.
These or his similar materials remarkably maintain heat and, to everything else, is absolutely harmless.
The insulation of the loggia begins from the floor. Thermal insulation material is laid on a bare concrete floor, covered with a beam with a cross section of 40 by 40 mm with a half -meter pitch. In this case, the cracks between the bars are thoroughly compacted by pieces of insulation. Then perpendicular to the first layer of the beam is covered with the second.
The walls of the loggia are insulated using the ending of thermal insulation material. Penophol is glued from the foil, which will give the effect of the “thermos” with the help of long self -tapping screws fixed a wood lamp is fixed. The final stage will be the final finish.
