Carpet installation: detailed instruction

The carpet -coatings were replaced by a new look — carpet modular tile. Novosibirsk Forum is a place where you can discuss many topics with Novosibirsk citizens. These are squares of 50 by 50 centimeters, which are reinforced with fiberglass for strength and applied to the base of bitumen or PVC. What are her advantages over rolling:

— Easy installation

— The ability to easily dismantle

— high expiration date due to the fact that you can change only one spoiled tiles

— access to communications located on the floor

— wide color scheme and rich coloring

— the ability to create a drawing on the floor using different colors

— heat — and sound insulation

— Convenience of transportation and storage

— low percentage of waste.

For its installation, special knowledge and great physical strength are not needed. But simple rules should be observed.

— Installation should be carried out after the tile has been in the prepared room for at least a day

— the surface should be perfectly even and clean

— The room temperature should not be less than 15 degrees

— Laying is carried out without glue, but you can use double -sided tape or special mastic

— You need to start from the center of the room.

As you can see, there is nothing complicated in the installation of this tile, and you do not need to worry about the presence of gaps, because thanks to the modern design, they simply are not visible.